Testing Your Virtual Network

To test that the RTX64 Virtual Network is configured properly, follow the steps below:

Steps:

  1. Configure the Windows Virtual RTX64 Ethernet Adapter.
  2. Start the RTSS subsystem.
  3. Obtain the static IP address for the RTX64 Virtual NIC Driver from the RTX64 Control Panel.
  4. Use the Windows ping utility to ping the RTX64 Virtual NIC Driver at the IP address from Step 3.
  5. Use RtssPing to ping the Virtual RTX64 Ethernet Adapter at the IP address specified in Step 1.

NOTE: If this step fails, it may be due to Windows Firewall. Turn off Windows Firewall if it is enabled, and then retest Step 5.

Related Topics: